Έχεις ξεκλειδωσει;
XIAOMI REDMI 3 PRO - TWRP LOineageOS 15.1
Αυτή η σελίδα κάνει χρήση των Cookies. Εάν θέλετε να μάθετε περισσότερα για τα Cookies, κάντε κλικ στις Περισσότερες πληροφορίες
-
-
-
amavroudis
ναι ο BL ειναι ξεκλειδωτος
το TWRP κανει το Backup στο interne flasch αυτοματα ??? η πρεπει εγω να του δωσω ενα φακελο πχ. στην SD Karte ???
Φιλε
makis1024
ευχαριστώ για τη συμβουλή τα ενεργοποιησα και τα δύο , και τωρα ο θεος βοηθος !!!!
-
Ωραία, ακολούθησε τις οδηγίες του @makis1024.
Και από εδώ τον δεύτερο τρόπο
TWRP 3.2.X.X για συσκευές XIAOMI
Και άμεσα flash custom rom ή lazyflasher για να μη μπρικαρει. -
την ρομ την εχω βάλει στην SD Karte ειναι οκ ? η θα πρεπει να ειναι στο ιντερνε ??
-
-
ευχαριστώ πολύ φίλε μου !!
σήμερα δεν εκανα αλλη δουλεια απο το να διαβαζω κσι να βλέπω ωρισμενα επιμορφωτικα βιντεο για να μην κανω καμιά πατάτα
ε βλέπεις εχουμε και καποια ηλικια ;-)))
( to Backup to kanei automata to TWRP ?? sto interne disk i tou les esi pou ??? ) -
Εσύ του καθορίζεις που θα αποθηκεύσει το nandroid backup
-
ekana tis odigies me tin egkatastasi tou TWRP mexri edo kala dino tin entoli :
Επόμενη εντολή είναι για να μπούμε στο twrp
fastboot boot TWRP_3.1.X.X.img (και σε αυτη τη περίπτωση αλλάζουμε το όνομα του twrp)
to exo kanei alla eimai akoma stin arxiki eikona tou Fastboot stin konsola cmd exo auto to minima ti kano ??
fastboot flash recovery twrp-3.2.3-0-ido.img
fastboot recovery twrp-3.2.3-0-ido.img
Microsoft Windows [Version 10.0.17134.472]
(c) 2018 Microsoft Corporation. Alle Rechte vorbehalten.
C:\Users\NM-PC>cd C:\adb\
C:\adb>fastboot devices
205ad5107d03 fastboot
C:\adb>fastboot flash recovery twrp-3.2.3-0-ido.img
target reported max download size of 268435456 bytes
sending 'recovery' (14624 KB)...
OKAY [ 0.634s]
writing 'recovery'...
OKAY [ 0.177s]
finished. total time: 0.822s
C:\adb>fastboot recovery twrp-3.2.3-0-ido.img
usage: fastboot [ <option> ] <command>
commands:
update <filename> Reflash device from update.zip.
Sets the flashed slot as active.
flashall Flash boot, system, vendor, and --
if found -- recovery. If the device
supports slots, the slot that has
been flashed to is set as active.
Secondary images may be flashed to
an inactive slot.
flash <partition> [ <filename> ] Write a file to a flash partition.
flashing lock Locks the device. Prevents flashing.
flashing unlock Unlocks the device. Allows flashing
any partition except
bootloader-related partitions.
flashing lock_critical Prevents flashing bootloader-related
partitions.
flashing unlock_critical Enables flashing bootloader-related
partitions.
flashing get_unlock_ability Queries bootloader to see if the
device is unlocked.
flashing get_unlock_bootloader_nonce Queries the bootloader to get the
unlock nonce.
flashing unlock_bootloader <request> Issue unlock bootloader using request.
flashing lock_bootloader Locks the bootloader to prevent
bootloader version rollback.
erase <partition> Erase a flash partition.
format[:[<fs type>][:[<size>]] <partition>
Format a flash partition. Can
override the fs type and/or size
the bootloader reports.
getvar <variable> Display a bootloader variable.
set_active <slot> Sets the active slot. If slots are
not supported, this does nothing.
boot <kernel> [ <ramdisk> [ <second> ] ] Download and boot kernel.
flash:raw boot <kernel> [ <ramdisk> [ <second> ] ]
Create bootimage and flash it.
devices [-l] List all connected devices [with
device paths].
continue Continue with autoboot.
reboot [bootloader] Reboot device [into bootloader].
reboot-bootloader Reboot device into bootloader.
help Show this help message.
options:
-w Erase userdata and cache (and format
if supported by partition type).
-u Do not erase partition before
formatting.
-s <specific device> Specify a device. For USB, provide either
a serial number or path to device port.
For ethernet, provide an address in the
form <protocol>:<hostname>[:port] where
<protocol> is either tcp or udp.
-p <product> Specify product name.
-c <cmdline> Override kernel commandline.
-i <vendor id> Specify a custom USB vendor id.
-b, --base <base_addr> Specify a custom kernel base
address (default: 0x10000000).
--kernel-offset Specify a custom kernel offset.
(default: 0x00008000)
--ramdisk-offset Specify a custom ramdisk offset.
(default: 0x01000000)
--tags-offset Specify a custom tags offset.
(default: 0x00000100)
-n, --page-size <page size> Specify the nand page size
(default: 2048).
-S <size>[K|M|G] Automatically sparse files greater
than 'size'. 0 to disable.
--slot <slot> Specify slot name to be used if the
device supports slots. All operations
on partitions that support slots will
be done on the slot specified.
'all' can be given to refer to all slots.
'other' can be given to refer to a
non-current slot. If this flag is not
used, slotted partitions will default
to the current active slot.
-a, --set-active[=<slot>] Sets the active slot. If no slot is
provided, this will default to the value
given by --slot. If slots are not
supported, this sets the current slot
to be active. This will run after all
non-reboot commands.
--skip-secondary Will not flash secondary slots when
performing a flashall or update. This
will preserve data on other slots.
--unbuffered Do not buffer input or output.
--version Display version.
-h, --help show this message.
C:\adb> -
-
-
Μετά το flash, κλείσε το με παρατεμένο το power και βάλε το σε recovery mode με vol +, vol- και power παρατεταμένο...
-
Μοιραστείτε
- Facebook 0
- Twitter 0
- Google Plus 0
- Reddit 0