Βλέποντας τα 'σωθικά' του Mi Note 2 παρατηρούμε την πολύ ποιοτική κατασκευή και την υψηλή τεχνολογία τοσο σε υλικά οσο και στο step prossecing που χρησιμοποιεί η xiaomi στην κατασκευή του.
Tear Down by IT168.com
SOURCE
The Mi Note 2 is using front & rear 3D curved glass, and a l centred frame chasis. Look at how it is perfectly pieced together.
You need to lightly heat up the back of the Mi Note 2, and making use of a power suction to hold the back glass cover, with another piece to gently ply it open.
There is a new theme released for the Mi Note 2, to support this curved edge.
After removing the back glass cover, you see additional piece meant for dissipating the heat.
The bottom portion house the daughter board, for the charging/data port.
On the top, the antenna is printed on a PCB, and the NFC antenna near the back camera.
As in other Mi devices, is it divided into 3 parts.
This particular hole is suspected to be an inherited design from the Mi Note 1, probably meant for securing the back glass cover.
This is all-day non-removable 4070mAh battery, manufactured by 'SCUD Group'
The microcontroller chip (MCU) MXT640U, by 'Atmel Microcontroller'.
Remove the top main motherboard, the microcontroller has insulation glue all round.
This is the rear-facing 22.56MP camera module, using the Sony IMX38 ISP
The daughter board, at the bottom for the type c USB port
This is the single piece integrated, micro-phone, LED flash and proximity sensor, on 1 board.
The Mi Note 2 get an upgrade of the front-facing 8MP camera module.
The front integrated 'home' button is made up of ceramic.
Conventional fingerprint scanner, unlike the Mi 5s' ultrasonic fingerprint scanner.
Tear Down by IT168.com
SOURCE
The Mi Note 2 is using front & rear 3D curved glass, and a l centred frame chasis. Look at how it is perfectly pieced together.
You need to lightly heat up the back of the Mi Note 2, and making use of a power suction to hold the back glass cover, with another piece to gently ply it open.
There is a new theme released for the Mi Note 2, to support this curved edge.
After removing the back glass cover, you see additional piece meant for dissipating the heat.
The bottom portion house the daughter board, for the charging/data port.
On the top, the antenna is printed on a PCB, and the NFC antenna near the back camera.
As in other Mi devices, is it divided into 3 parts.
This particular hole is suspected to be an inherited design from the Mi Note 1, probably meant for securing the back glass cover.
This is all-day non-removable 4070mAh battery, manufactured by 'SCUD Group'
The microcontroller chip (MCU) MXT640U, by 'Atmel Microcontroller'.
Remove the top main motherboard, the microcontroller has insulation glue all round.
This is the rear-facing 22.56MP camera module, using the Sony IMX38 ISP
The daughter board, at the bottom for the type c USB port
This is the single piece integrated, micro-phone, LED flash and proximity sensor, on 1 board.
The Mi Note 2 get an upgrade of the front-facing 8MP camera module.
The front integrated 'home' button is made up of ceramic.
Conventional fingerprint scanner, unlike the Mi 5s' ultrasonic fingerprint scanner.